Vendor
Filter by topic

L3VPN over Segment Routing Without LDP - Huawei VRP, Built from Scratch

No LDP in the core, only SR. I built an L3VPN on top, BGP came up, but the remote LAN never reached the VPN routing table. The cause was a missing tunnel policy. I also wrote down the mistakes I made along the way, in order.

HuaweiNovember 9, 20268 min

Running a VPRN over SR Tunnels - Nokia SR OS

I build a VPRN on top of a core with SR and no LDP. BGP is up, the SR tunnel exists, but ping fails: auto-bind-tunnel is missing. I show the trap, fix it, find the two labels in the tables, then turn SR off on P and show why the VPN goes down.

NokiaNovember 9, 202615 min

Running L3VPN over Segment Routing: The Journey of a Two-Label Packet

I separate the two jobs of an L3VPN: ‘which customer’ (the VPN label, MP-BGP) and ‘how do I get to the far PE’ (the transport tunnel). With SR only the second one changes. I follow a packet with two labels step by step and explain the ‘route is there but ping fails’ trap and why the tunnel choice has to be stated explicitly.

GeneralNovember 9, 202612 min

Campus Network Design: 2-Tier, 3-Tier, Fabric and Cloud (ENCOR 1.1.a)

CCNP ENCOR blueprint item 1.1.a: 2-tier (collapsed core), 3-tier, fabric and cloud designs. Using a city-transit analogy, I explain which design fits when, and why.

CiscoNovember 6, 20266 min

High Availability: Redundancy, FHRP (HSRP) and SSO (ENCOR 1.1.b)

CCNP ENCOR 1.1.b: redundancy layers, first-hop redundancy (HSRP, VRRP, GLBP) and SSO/NSF. Explained with a shared phone number analogy, plus a browser HSRP lab at the end.

CiscoNovember 6, 20267 min

What Is Segment Routing? MPLS Without LDP, from Scratch

I explain Segment Routing with a simple map analogy: what SID, SRGB and node SID are, how the label is calculated, why it stays the same at every hop, what happens when you turn LDP off. Step-by-step setup on Nokia, the Cisco and Huawei equivalents, and ready-made labs that open in your browser.

GeneralNovember 3, 202622 min

What Is VXLAN? VTEP, VNI and Encapsulation from Scratch

I explain VXLAN with an internal memo and courier envelope analogy: why it exists, what VTEP and VNI are, how the packet is wrapped, where the 50 bytes come from, how traffic to an unknown destination is handled. A comparison with VPLS, the commands for the same setup on three vendors and a ready-made three-vendor lab that opens in your browser.

GeneralNovember 3, 202615 min

PE–CE OSPF: Connecting Customer Sites with OSPF and Comparing It with eBGP - Huawei VRP

In a Huawei VPRN I set up the CE–PE link with OSPF: a VPN-instance-specific OSPF process on the PE and import-route in both directions. I write about where I got stuck, the differences from eBGP, and why eBGP is mostly preferred in real life.

HuaweiNovember 2, 202619 min

PE–CE eBGP: Connecting Customer Sites with BGP - Huawei VRP

In a Huawei VPRN I connect customer sites with eBGP instead of static routes. The neighbor inside the VPN instance, network on the CE, and substitute-as when both sites are in the same AS. I put the differences from Nokia (policy, as-override) side by side.

HuaweiOctober 27, 202616 min

What Is MPLS? Labels, LSPs, PE and P Routers from Scratch

I explain MPLS with a hospital queue-ticket analogy: what a label is, what push, swap and pop do, why an LSP is one-way, and how PE differs from P. With ten diagrams, two real screenshots and a ready-made Nokia lab that opens in your browser.

GeneralOctober 27, 202612 min

PE–CE eBGP: Connecting Customer Sites with BGP - Nokia SR OS

In a VPRN I connect customer sites with eBGP instead of static routes. I explain the export policy line by line, and show one by one where I got stuck in my own setup (empty policy, no LSP, double interface, AS loop).

NokiaOctober 26, 202617 min

Two-Customer Isolation on Huawei VPRN: Same IPs, Separate Worlds

Two customers using the same IP blocks on one MPLS backbone, separated with RD/RT. Setup, verification and deliberate failure experiments (wrong RT, shared RT), with a Nokia mapping.

HuaweiOctober 19, 20269 min

MPLS L3VPN (VPRN) - Huawei

Setting up MPLS L3VPN on Huawei VRP step by step: OSPF backbone, LDP, VPN instance, MP-BGP and end-to-end verification. At the top there’s a comparison table with the Nokia SR OS commands.

HuaweiOctober 12, 202613 min

OSPF Multi-Area - Huawei

Moving from single-area OSPF to multi-area: ABR, the Area 0 rule, Type 3 LSAs, how to read the LSDB and the routing table, where I got stuck, and virtual-link.

HuaweiOctober 11, 202613 min

VPRN Configuration - Nokia SR OS

Setting up MP-BGP and VPRN on top of the MPLS core I built with LDP, isolating two customers with the same IP addresses from each other, where I got stuck and how I fixed it.

NokiaOctober 8, 202610 min

eNSP Setup Guide - HUAWEI

What eNSP is, how to install it, and the tricky points that break the install on Windows 11: the WinPcap/Npcap clash, the VirtualBox block, memory integrity/VBS, Program Files permissions, and Error 40.

HuaweiOctober 7, 20266 min

VPLS Configuration - Nokia SR OS

Setting up an SDP and VPLS on top of the LSP I built with LDP, connecting two CEs to the same L2 network, following the packet path in Wireshark, and where I got stuck.

NokiaOctober 5, 202614 min

LDP Configuration - Nokia SR OS

Building an LSP transport tunnel between PEs with LDP over OSPF: label distribution and the push / swap / pop logic.

NokiaOctober 1, 202612 min

Why this site exists

To share what I know, and to fix what I got wrong.

BlogSeptember 30, 20262 min