L3VPN over Segment Routing Without LDP - Huawei VRP, Built from Scratch

No LDP in the core, only SR. I built an L3VPN on top, BGP came up, but the remote LAN never reached the VPN routing table. The cause was a missing tunnel policy. I also wrote down the mistakes I made along the way, in order.

HuaweiNovember 9, 20268 min

PE–CE OSPF: Connecting Customer Sites with OSPF and Comparing It with eBGP - Huawei VRP

In a Huawei VPRN I set up the CE–PE link with OSPF: a VPN-instance-specific OSPF process on the PE and import-route in both directions. I write about where I got stuck, the differences from eBGP, and why eBGP is mostly preferred in real life.

HuaweiNovember 2, 202619 min

PE–CE eBGP: Connecting Customer Sites with BGP - Huawei VRP

In a Huawei VPRN I connect customer sites with eBGP instead of static routes. The neighbor inside the VPN instance, network on the CE, and substitute-as when both sites are in the same AS. I put the differences from Nokia (policy, as-override) side by side.

HuaweiOctober 27, 202616 min

Two-Customer Isolation on Huawei VPRN: Same IPs, Separate Worlds

Two customers using the same IP blocks on one MPLS backbone, separated with RD/RT. Setup, verification and deliberate failure experiments (wrong RT, shared RT), with a Nokia mapping.

HuaweiOctober 19, 20269 min

MPLS L3VPN (VPRN) - Huawei

Setting up MPLS L3VPN on Huawei VRP step by step: OSPF backbone, LDP, VPN instance, MP-BGP and end-to-end verification. At the top there’s a comparison table with the Nokia SR OS commands.

HuaweiOctober 12, 202613 min

OSPF Multi-Area - Huawei

Moving from single-area OSPF to multi-area: ABR, the Area 0 rule, Type 3 LSAs, how to read the LSDB and the routing table, where I got stuck, and virtual-link.

HuaweiOctober 11, 202613 min

eNSP Setup Guide - HUAWEI

What eNSP is, how to install it, and the tricky points that break the install on Windows 11: the WinPcap/Npcap clash, the VirtualBox block, memory integrity/VBS, Program Files permissions, and Error 40.

HuaweiOctober 7, 20266 min