Running L3VPN over Segment Routing: The Journey of a Two-Label Packet

I separate the two jobs of an L3VPN: ‘which customer’ (the VPN label, MP-BGP) and ‘how do I get to the far PE’ (the transport tunnel). With SR only the second one changes. I follow a packet with two labels step by step and explain the ‘route is there but ping fails’ trap and why the tunnel choice has to be stated explicitly.

GeneralNovember 9, 202612 min

What Is Segment Routing? MPLS Without LDP, from Scratch

I explain Segment Routing with a simple map analogy: what SID, SRGB and node SID are, how the label is calculated, why it stays the same at every hop, what happens when you turn LDP off. Step-by-step setup on Nokia, the Cisco and Huawei equivalents, and ready-made labs that open in your browser.

GeneralNovember 3, 202622 min

What Is VXLAN? VTEP, VNI and Encapsulation from Scratch

I explain VXLAN with an internal memo and courier envelope analogy: why it exists, what VTEP and VNI are, how the packet is wrapped, where the 50 bytes come from, how traffic to an unknown destination is handled. A comparison with VPLS, the commands for the same setup on three vendors and a ready-made three-vendor lab that opens in your browser.

GeneralNovember 3, 202615 min

What Is MPLS? Labels, LSPs, PE and P Routers from Scratch

I explain MPLS with a hospital queue-ticket analogy: what a label is, what push, swap and pop do, why an LSP is one-way, and how PE differs from P. With ten diagrams, two real screenshots and a ready-made Nokia lab that opens in your browser.

GeneralOctober 27, 202612 min