L3VPN over Segment Routing Without LDP - Huawei VRP, Built from Scratch

No LDP in the core, only SR. I built an L3VPN on top, BGP came up, but the remote LAN never reached the VPN routing table. The cause was a missing tunnel policy. I also wrote down the mistakes I made along the way, in order.

HuaweiNovember 9, 20268 min

Running a VPRN over SR Tunnels - Nokia SR OS

I build a VPRN on top of a core with SR and no LDP. BGP is up, the SR tunnel exists, but ping fails: auto-bind-tunnel is missing. I show the trap, fix it, find the two labels in the tables, then turn SR off on P and show why the VPN goes down.

NokiaNovember 9, 202615 min

What Is Segment Routing? MPLS Without LDP, from Scratch

I explain Segment Routing with a simple map analogy: what SID, SRGB and node SID are, how the label is calculated, why it stays the same at every hop, what happens when you turn LDP off. Step-by-step setup on Nokia, the Cisco and Huawei equivalents, and ready-made labs that open in your browser.

GeneralNovember 3, 202622 min

PE–CE OSPF: Connecting Customer Sites with OSPF and Comparing It with eBGP - Huawei VRP

In a Huawei VPRN I set up the CE–PE link with OSPF: a VPN-instance-specific OSPF process on the PE and import-route in both directions. I write about where I got stuck, the differences from eBGP, and why eBGP is mostly preferred in real life.

HuaweiNovember 2, 202619 min

PE–CE eBGP: Connecting Customer Sites with BGP - Huawei VRP

In a Huawei VPRN I connect customer sites with eBGP instead of static routes. The neighbor inside the VPN instance, network on the CE, and substitute-as when both sites are in the same AS. I put the differences from Nokia (policy, as-override) side by side.

HuaweiOctober 27, 202616 min

What Is MPLS? Labels, LSPs, PE and P Routers from Scratch

I explain MPLS with a hospital queue-ticket analogy: what a label is, what push, swap and pop do, why an LSP is one-way, and how PE differs from P. With ten diagrams, two real screenshots and a ready-made Nokia lab that opens in your browser.

GeneralOctober 27, 202612 min

PE–CE eBGP: Connecting Customer Sites with BGP - Nokia SR OS

In a VPRN I connect customer sites with eBGP instead of static routes. I explain the export policy line by line, and show one by one where I got stuck in my own setup (empty policy, no LSP, double interface, AS loop).

NokiaOctober 26, 202617 min

Two-Customer Isolation on Huawei VPRN: Same IPs, Separate Worlds

Two customers using the same IP blocks on one MPLS backbone, separated with RD/RT. Setup, verification and deliberate failure experiments (wrong RT, shared RT), with a Nokia mapping.

HuaweiOctober 19, 20269 min

MPLS L3VPN (VPRN) - Huawei

Setting up MPLS L3VPN on Huawei VRP step by step: OSPF backbone, LDP, VPN instance, MP-BGP and end-to-end verification. At the top there’s a comparison table with the Nokia SR OS commands.

HuaweiOctober 12, 202613 min

VPRN Configuration - Nokia SR OS

Setting up MP-BGP and VPRN on top of the MPLS core I built with LDP, isolating two customers with the same IP addresses from each other, where I got stuck and how I fixed it.

NokiaOctober 8, 202610 min