L3VPN over Segment Routing Without LDP - Huawei VRP, Built from Scratch

No LDP in the core, only SR. I built an L3VPN on top, BGP came up, but the remote LAN never reached the VPN routing table. The cause was a missing tunnel policy. I also wrote down the mistakes I made along the way, in order.

HuaweiNovember 9, 20268 min

Running a VPRN over SR Tunnels - Nokia SR OS

I build a VPRN on top of a core with SR and no LDP. BGP is up, the SR tunnel exists, but ping fails: auto-bind-tunnel is missing. I show the trap, fix it, find the two labels in the tables, then turn SR off on P and show why the VPN goes down.

NokiaNovember 9, 202615 min

Running L3VPN over Segment Routing: The Journey of a Two-Label Packet

I separate the two jobs of an L3VPN: ‘which customer’ (the VPN label, MP-BGP) and ‘how do I get to the far PE’ (the transport tunnel). With SR only the second one changes. I follow a packet with two labels step by step and explain the ‘route is there but ping fails’ trap and why the tunnel choice has to be stated explicitly.

GeneralNovember 9, 202612 min

What Is Segment Routing? MPLS Without LDP, from Scratch

I explain Segment Routing with a simple map analogy: what SID, SRGB and node SID are, how the label is calculated, why it stays the same at every hop, what happens when you turn LDP off. Step-by-step setup on Nokia, the Cisco and Huawei equivalents, and ready-made labs that open in your browser.

GeneralNovember 3, 202622 min

What Is MPLS? Labels, LSPs, PE and P Routers from Scratch

I explain MPLS with a hospital queue-ticket analogy: what a label is, what push, swap and pop do, why an LSP is one-way, and how PE differs from P. With ten diagrams, two real screenshots and a ready-made Nokia lab that opens in your browser.

GeneralOctober 27, 202612 min