Glossary
The terms used in the posts and labs, in a sentence or two each. Hover a term with a dotted underline inside a post to see the same definition.
MPLS
- Etiket (label)
- The 20-bit number pushed in front of a packet in MPLS. Routers forward on it, and it usually changes at every hop. Related post →
- FEC Forwarding Equivalence Class
- A group of packets forwarded the same way. In LDP it is usually one destination prefix, e.g. 4.4.4.4/32. Related post →
- Implicit-null
- The special label (3) an egress router advertises to say 'send it to me unlabeled'. It triggers PHP on the router before it. Related post →
- LDP Label Distribution Protocol
- The protocol routers use to hand out a label to their neighbors for every prefix the IGP knows. It runs as a separate protocol next to the IGP. Related post →
- LSP Label Switched Path
- The one-way path labeled packets follow from ingress to egress. The return direction needs its own LSP. Related post →
- MPLS Multiprotocol Label Switching
- Forwarding a packet by a short label pushed in front of it instead of looking up the IP header at every hop. The basis of service provider cores. Related post →
- P router Provider router
- A transit router in the core. It knows nothing about customer routes and forwards on the label alone. Related post →
- PE Provider Edge
- The provider's edge router that faces the customer. It pushes and removes labels and holds the customer VPNs. Related post →
- PHP Penultimate Hop Popping
- The second-to-last router removes the label and sends the packet to the egress as plain IP, so the egress does only one lookup. Related post →
- Swap / push / pop
- Label operations: push adds a label (ingress PE), swap replaces the incoming label with the outgoing one (P), pop removes it. Related post →
Segment Routing
- Adjacency SID
- A local SID bound to one link, used to say 'leave towards this neighbor over this link'. Related post →
- Node SID
- The prefix SID given to a router's loopback (the system IP on Nokia). It means 'go to this router'. Related post →
- Segment Routing SR-MPLS
- An MPLS method where the IGP (OSPF/IS-IS) distributes the labels instead of a separate protocol, so LDP is no longer needed. Related post →
- SID Segment ID
- The identifier given to a router or a path in Segment Routing. For a prefix SID it is an index (e.g. 4), the same across the whole domain. Related post →
- SRGB Segment Routing Global Block
- The label block a router reserves for SR labels (e.g. 16000–23999). Label = the next router's SRGB base + the SID index. Related post →
IGP
- ABR Area Border Router
- A router attached to more than one OSPF area. It carries routes between areas as Type 3 LSAs. Related post →
- Area 0 Backbone area
- OSPF's backbone area. Every other area reaches the others through Area 0. Related post →
- ASBR AS Boundary Router
- A router that injects external routes (static, BGP etc.) into OSPF. Related post →
- DR / BDR Designated Router
- The representative router (and its backup) OSPF elects on multi-access networks like Ethernet. Everyone exchanges LSAs through the DR. Related post →
- IS-IS
- A link-state IGP like OSPF, common at service providers. It runs directly over L2, not over IP.
- LSA Link State Advertisement
- The link information OSPF routers send each other. Each type carries something different: Type 1 router, Type 3 summary, Type 5 external. Related post →
- OSPF Open Shortest Path First
- A link-state IGP. Every router builds a map of the network and computes the shortest path itself. Related post →
- Router ID
- The 32-bit identity of a router inside OSPF and BGP. Usually the loopback address is chosen. Related post →
BGP
- AS Autonomous System
- A network under a single administration, known in BGP by a number (ASN). Related post →
- BGP Border Gateway Protocol
- The protocol that carries routes between autonomous systems. It carries the routes of the internet and of MPLS VPNs. Related post →
- eBGP
- A BGP session between different ASes. Also common between PE and CE. Related post →
- iBGP
- A BGP session inside one AS. A route learned from an iBGP peer is not passed to another iBGP peer, which is why full mesh or a route reflector is needed. Related post →
- MP-BGP Multiprotocol BGP
- BGP that can carry address families beyond IPv4 (VPN-IPv4, EVPN etc.). It carries MPLS VPN routes between PEs. Related post →
- Route reflector
- A central router that reflects routes to its clients, so iBGP routers don't all need to peer with each other.
VPN
- CE Customer Edge
- The customer's router that connects to the PE. It knows nothing about MPLS and talks plain IP to the PE. Related post →
- L3VPN
- A service that carries customers' IP routes over the MPLS core while keeping them separate from each other (RFC 4364). Related post →
- RD Route Distinguisher
- An 8-byte prefix added in front of a route. It makes two customers' identical 10.0.0.0/24 unique in BGP; it does not decide which VRF imports it. Related post →
- RT Route Target
- A BGP extended community attached to a route. It decides which VRFs import the route. Related post →
- VPN instance
- Huawei VRP's name for a VRF (ip vpn-instance). Related post →
- VPNv4 VPN-IPv4
- An IPv4 route with an RD in front of it, so different customers' identical prefixes travel in MP-BGP without clashing. Related post →
- VPRN Virtual Private Routed Network
- Nokia SR OS's name for the MPLS L3VPN service. Other vendors call it a VRF or VPN instance. Related post →
- VRF Virtual Routing and Forwarding
- A separate routing table inside a router reserved for one customer. The same IPs can live in different VRFs without clashing. Related post →
L2 & VXLAN
- BUM Broadcast
- Traffic an L2 service has to copy to every site: broadcast, unknown unicast and multicast. Related post →
- EVPN Ethernet VPN
- A control plane that distributes MAC and IP information with BGP. It is replacing VPLS and flood-and-learn VXLAN. Related post →
- SDP Service Distribution Point
- Nokia's tunnel definition that services ride on. Usually bound to an LDP or RSVP LSP. Related post →
- Underlay / overlay
- The underlay is the real IP network that carries the tunnels; the overlay is the virtual network built on top (e.g. VXLAN tunnels). Related post →
- VNI VXLAN Network Identifier
- The segment ID in VXLAN. It is 24 bits (~16 million), beyond the 12-bit limit of a VLAN ID. Related post →
- VPLS Virtual Private LAN Service
- An L2 service that joins several sites over MPLS as if they were plugged into one virtual Ethernet switch. Related post →
- VTEP VXLAN Tunnel End Point
- The end point of a VXLAN tunnel. It wraps (encap) and unwraps (decap) the frame. Related post →
- VXLAN
- An overlay technology that wraps L2 Ethernet frames in UDP/IP to carry them across an L3 network. Related post →
General
- Administrative distance
- The value that decides which protocol to trust when the same prefix is learned from several; lower wins. Huawei and Nokia call it preference.
- ECMP Equal-Cost Multi-Path
- Sharing traffic across several equal-cost paths to the same destination.
- eNSP
- Huawei's free network simulator. It runs VRP routers and switches on your computer. Related post →
- Loopback / system IP
- An address tied to no physical port, so it is always up. Used as router ID and for LDP and SR identity; called system on Nokia. Related post →
- MTU Maximum Transmission Unit
- The largest packet a link can carry. Labels and VXLAN headers make packets bigger, so the core MTU has to be raised. Related post →
No term matches.