Hi, I’m Ulaş. I’m a network engineer and for a while now I’ve been building things in the lab, getting stuck, and spending hours until I solve them. The problem is that I forget most of what I solve within two weeks. This site exists so those notes don’t disappear.

Why I write

I started with enterprise networks: switching, routing, wireless, the Aruba and Cisco side. Now I’m turning toward telecom and transport networks. Things work differently there: MPLS, service networks, the Nokia and Huawei gear that operators use. You can’t learn this just by reading a book. You learn it by building and breaking, so that’s what I do, and then I write it down.

Writing is part of the work, really. If I can explain something to someone else, I’ve actually understood it. If I can’t, there’s a gap somewhere. The posts on this site expose both.

What’s here

  • Lab posts: Labs on Nokia SR OS and Huawei, built with tools like GNS3. Topics like OSPF, LDP, VPRN and VPLS. Topology, config output, and what the packet actually does in Wireshark.
  • Where I got stuck: This is the most valuable part for me. The “I got stuck here, this is how I fixed it” parts sit as their own heading inside the posts.
  • Commands: A short reference list of the commands I use often.
  • Roadmap: What I’ve finished, what’s next, and which certifications I’m after. Take a look at the roadmap. I update that page as I go.

How I write

Plain and simple. Wherever I can, I include the “why did it happen” part, because seeing the command alone isn’t enough. I also try to be honest: if something I wrote turns out to be wrong, I fix the post.

If you spot a mistake, don’t hesitate to tell me. The point of this site is to share what I know and fix what I got wrong. If you’d like to know me better, have a look at the About page.

See you around.